Ingenious Sliding Table Makes Easy Work of Cross-Cutting Long or Cumbersome Workpieces\n\nThis ingenious sliding table acts like a �sled� to support long or wide workpieces as it carries them smoothly and precisely through otherwise difficult cross-cuts. With this accessory, precise crosscuts and miters on large pieces of stock are easy and accurate!\n\nIts durable, laminated surface is a full 15-3/4-inches x 31-3/4-inches to provide plenty of support. The aluminum fence adjusts quickly for 90-degree, 45-degree, 36-degree, 30-degree and 22.5-degree angle cuts to make precise miters for four, five, six, or eight-sided projects.\n\nAvailable in three versions for use with all MARK?7 / MARV V models, as well as other table saws.\n\nAuxiliary Table Lets You Match Cross-Cut Table Height on the Opposite Side of Your Saw Blade to Support Separating Scrap from Your Workpiece\n\nThe miter bar on the bottom locks this auxiliary table into the table slot on the opposite side of the blade from the Cross-cut Sliding Table when it's in use. Its purpose is to match the height and thickness of the Cross-cut Sliding Table to keep scrap material from falling into your blade. Eliminates possible blade problems and dangerous kickbacks.\n\nNote: For All MARK Models. Only made for Shopsmith machines.\n\nNote: For use with Crosscut Sliding Table\n\nAdd Another Level of Accuracy with the Crosscut Sliding Table Sandpaper (516913)\nAbrasive Strip keeps your work piece from slipping out of position as you cut. While using the Cross-Cut Sliding Table. 1-1/2" x 30" Adhesive-backed Aluminum Oxide Abrasive Strip.\n